Printy Panels - Shutter Doors

Adds sliding shutter tambour doors to Printy Panels.

Printing

• Print tambour shutters with 0.2mm layer heights.
• Swap filament on layer 3 for a 2-color shutter.
• Tracks can be printed with 0.2, 0.25, or 0.3mm layer heights.
• All parts can be printed without supports.
• Add a brim if curling is an issue.
• Use PETG, ABS, or strong formulations of PLA. Silk, woodfill, and matte PLAs are NOT recommended.

Loose Connectors?

If your connections are too loose, try one of the following:

• Add a slight fuzzy skin (0.1mm variance) to the connectors. This will essentially make the connectors a little thicker without altering their overall dimensions.
• Increase your extrusion multiplier so that the connector walls are slightly thicker.
• Increase your print temperature slightly - this often has a similar result to increasing the extrusion multiplier.

Yes! This model is available for commercial use!

Creative Commons Attribution (CC BY 4.0)

This license grants you permission to download, distribute, alter, print, and even sell copies of this design.

This license requires you to provide attribution so that others can find my work.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text

"Printy Panels - Shutter Doors" (https://3dprinty.xyz/project/119) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

Learn More