A small twisty magnetic fidget in fungi form.
Customization
Core Options
- Default
- Keychain - Includes a hole for a keychain ring. Glue is recommended if using this as a keychain fidget.
Effect Options
- Click - The top and bottom halves of the fidget clap for a sharp click sound
- Rattle - Loose magnets rattle they jump between attract and repel pairs
Magnet Options
- 6x3mm magnets - Strongest force
- 3x3mm magnets - More click spots
More Customization
Printing
- Designed for 0.2mm layer heights
- All parts can be printed without supports
- Pause the print to embed magnets in the base - Make sure magnets are oriented so that both sides of the fidgets will pull together.
- Optional: when printing the 3x3mm version, alternate magnet orientation between attract and repel for fewer click spots and a stronger snap.
Assembly
- Test screwing the top and bottom core parts together to make sure they fit well. You may need to wear them in a little if they are too tight.
- If the core parts are too loose, you may need to add glue during final assembly. Keeping them unglued is recommended so you can reconfigure your fidget in the future.
- Glue magnets into the mushroom top. Lock the two sides of the fidget together with the core.
