Sculptember Mini Skeleton

Summary

A mini skeleton with a removable head!

Printing

• Head prints separately
• Can be printed in both FDM and resin
• Supports ARE required on the body - especially below the pelvis and ribs. If printing body #1, supports are needed under the elbows
• Minimal infill required

Assembly

The head prints as a separate part that can be left loose or glued on. If using glue, just a drop of hot glue is sufficient for a good hold that can be removed later.

All Sculptember Models

• Ghost
• Mummy
• Frankenstein
• Werewolf
• Dracula
• Mere-Monster
• Witch
• Skeleton
• Slime Creature
• Gargoyle

More Customization

Check out the STL Twister by Andrew Sink to put a custom twist on this model.

Yes! This model is available for commercial use!

Creative Commons Attribution (CC BY 4.0)

This license grants you permission to download, distribute, alter, print, and even sell copies of this design.

This license requires you to provide attribution so that others can find my work.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text

"Sculptember Mini Skeleton" (https://3dprinty.xyz/project/132) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

Learn More